Bort BWS-905-R Bedienungsanleitung Seite 20

1. SBM group offers the 2-year warranty from the date of sale
for all its products. Professional and commercial tools are not
covered by the warranty. Repair is only available for a fee in this
case.
2. Non-commercial use of the tools imposes limitations On the
duration Of its Operationand restricts the intended usage to
household purposes only. The continuous operating time should
not exceed 40 hours. 'n addition,
made after every 15 minutes Ofcontinuous operation. Ignoring
this condition when using the tools is a violation of the good
operating practice (this provision does not apply to pumps, gen-
erators, chargers and similar equipment). Subject to the above
mentioned condition, the service life Of the tools is 7 years.
When you purchase a tool, a warranty card is issued (fields with
a date Ofsale, model, and serial number are mandatory,other
fields can also be completed). Please keep the card together
with the sales receiptduringthe entire warranty periodfor pres-
entation at the service centre.
Electric tools are only accepted for warranty repairs when as-
sembled with all removable devices and their fastening ele-
ments (bus bars, saw blades, chains, knives, trimmer heads,
injectors, sprockets,bolts, nuts, and mountingflanges) in work-
ing condition.
3. The warranty period is extended up to 3-5 years'. provided
the owner registers the electric power tool within 2 weeks af-
ter the purchase date. The extended warranty does not cover
rechargeable tools, battery chargers, and supplied accesso-
ries. Registration is only possible online at www.sbm-group.
Com.Please print the registration certificate at the time Ofreg-
istration. The certificate is the only confirmation of the fact of
registration. The registration certificate should be presented at
the service centre together with the warranty card and sales
receipt.
4. The following malfunctionsare eliminatedfree Ofcharge dur-
ing the warranty period:
Damage to the instrument, caused by the use Oflow-quality
materials
Assembly defects due to the fault of the manufacturer.
Thewarranty doesn6tcover:
5.
Malfunctionsof the tools caused by the failure to complywith
the operating instructions.
Mechanical damage (cracks, chips, mechanical damage to
power cords. mechanical damage to the enclosure. etc.),
damage caused by exposure to aggressive environments
and high temperatures, damage induced by the ingress of
liquids or foreign matter into ventilation grids Ofthe electric
tools, as well as damagedue to improper storage (corrosion
Of metal parts, etc).
Toolswith defects which were caused by an Overload(simul-
taneous failure Ofthe rotor and stator), improper use (usage
of blunt, unsuitable, unbalanced, or improperly chosen re-
placement devices), lack of maintenance or care. and use
of the tools for purposes Other than the intended purpose
(for example, for processing of materials for which the tool
is not intended,etc.), as well as by the instability of electric
power supply, exceeding the standards set by EN 61000-3-2,
EN 61000-3-3.Among others, undeniablesigns of an over-
load include:changes in appearance,deformationor melting
Ofparts and componentsof the product,darkening or char-
ring Ofwire insulation under hightemperatures.
10-15 minute breaks are to be
Wear parts and materials (carbon brushes, belts, rubber
gaskets, seals. guards, platforms, bus bars, gears, bearings,
hubs, coil heaters, pulleys, rollers, rods, lock buttons, etc.),
Components (gears, shafts, bearings, rods, rollers, etc.) sub-
ject to deterioration due to lubrication wear-out, as well as
replacement devices (drill chucks, SDS cartridges, platforms,
collets, bus bars, flexible shafts, batteries, battery chargers,
etc.) and supplies (knives. saws, abrasives, saw blades, drill
bits, drills, lubrication, etc.), except in cases Of mechanical
damage of the above mentioned products due to failures Of
the electrictool which are covered by this warranty.
Natural wear of the tool, its parts and components (wearing
out of the resource,
tion. wearing out of the lubrication).
Toolsthat were unsealedor repaired duringthe warranty pe-
riod by persons or organizationswho are not legally author-
ized to perform these activities.
Toolswith removed.erased, wornout or changedserialnum-
bers. including cases when the data of the electric tool does
not match the data Of the warranty card.
Preventive maintenance Of the electric tools, for example,
cleaning, washing, lubrication.
6. DO not Operateelectric tools exhibiting failure symptoms
(high arcing,smell of burning,increasednoise. severevibration,
uneven rotation, loss of power). DO not use the electric tools
if there is any mechanical damage to the power cord (cracks,
chips, tears, binds).AC plug,or the enclosure of the tool.
7, During the warranty period. faulty parts and components
Ofthe instrument are repaired Or replaced free Ofcharge. The
Service Centre reserves the nght to decide whether such parts
and components are to be replaced or repaired.
If a failure or malfunctionis recognized by SBMgroup as a war-
ranty case, then it can be removed according to our own choice
by repair or replacement of the defective tool. Replaced tools
and parts become the property of the Service Centre of SBM
group.
8. GUIDELINES FOR THE PREVENTIVE
ELECTRIC TOOLS
Regular preventivemaintenance(cleaning, washing, relubrica-
tion of bearingsand gearbox,replacementof fast wearingparts)
is recommendedfor thetools. Maintenanceensures perfect op-
erationof the electric tool during its entireservice life cycle. The
frequency of preventive maintenance at rated load is determined
according to the natural wear Of carbon brushes. Maintenance
work is charged according to the price list of the service centre.
Any failures covered by the warranty anddetected in the course
of maintenanceare repairedfree Ofcharge. Warrantedfailures,
which are detected by the diagnostics.are eliminatedas agreed
by the parties according to the routine procedure.
Preventive maintenance
warranty period.
Other claims. except for the above mentioned right for free re-
medial measures,are not covered by this warranty.
9. This warranty does not affect other legal consumer rights
granted by the applicable laws.
• Depending on the model.
-3-
severe internal or external contamina-
MAINTENANCE
does not extend the duration
OF
Of the