Starting The Appliance; Changing The Programme - Inventum Vvw6008Aw Benutzerhandbuch

STARTING THE APPLIANCE

1. Press the on/off button to start the appliance.
The indicator on the on/off button lights up.
SELECTING A PROGRAMME
1. Use the programme selection button to select a programme. The indicator for the programme lights up.
2. Use the timer button to delay the starting time of the programme. See section Delaying the programme.
3. Use the 'Half Load' button to add the 'half load' option to the selected programme.
Note:
If the 'half load' option is not compatible with the selected programme, a buzzer will sound.
4. If necessary, cancel the 'half load' option by pressing the 'half load' button once more, until the accompanying indicator
switches off.
5. Press the start/pause button to start the programme.
Programme Description
Fast Short programme for lightly soiled items, such as cups
30 min. and glasses.
Eco Daily programme for regularly soiled items.
The programme takes longer, but uses less water and
heats up slowly for a lower energy consumption.
Fast Short programme for regularly soiled items.
50 min.
Intensive Programme for strongly soiled items.
Hygiene Programme for strongly soiled items that require
hygienic cleaning.
• The duration of the programme can vary on the basis of the amount of items, the water temperature, the ambient
temperature and the selected additional functions.
• The eco programme is suitable for cleaning regularly soiled items. This is the most efficient programme through
a combination of energy and water consumption that meets EU legislation in the field of ecological design.
Note:
The energy consumption values of the eco programme can vary in accordance with directives 10/16/2010 and
1059/2010. The table meets directives 2019/2022 and 2017/2022.
• When using the appliance in accordance with the instructions from the manufacturer when washing dishes in
a dishwasher intended for household use, less energy and water is usually consumed during the use phase than when
washing by hand.
• Short programmes do not include drying.
• When selecting a short programme, only use a dishwasher detergent in powder form.
• To stimulate the drying process, we recommend opening the door by 15 cm once the cycle has been completed.

CHANGING THE PROGRAMME

You can change the programme while the appliance is in operation.
1. Press the start/pause button.
2. Wait for the programme to stop.
3. Use the programme selection button to select a different programme.
4. Press the start/pause button.
The newly selected programme will resume the run of the previously selected programme.
DELAYING THE PROGRAMME
Note:
The starting time of the programme can be delayed by 3, 6 or 9 hours.
38
• English
Time Electricity
(min.) consumption
[kWh/cycle]
30 0.740
205 0.824
50 1.100
117 1.700
127 1.900
Water
consumption
[l/cycle]
12.4
12.0
12.0
17.2
16.0