EuroLite AKKU IP BAR-6 Entry Bedienungsanleitung Seite 38

CH 8
Auto program
CH 9
Speed auto program
CH 10
Color temperature
CLEANING AND MAINTENANCE
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1 Disconnect the device from power and allow it to cool.
2 Open the fuse holder of the mains connection with a fitting screwdriver.
3 Remove the old fuse from the fuse holder and replace it with a new fuse.
4 Carefully push the fuse holder back into its position before reapplying power.
080 – 089 Dark orange
090 – 099 Green yellow
100 – 109 Salmon
110 – 119 Turquoise
120 – 129 Light green
130 – 139 Orange
140 – 149 Straw
150 – 159 Lavender
160 – 169 Light blue
170 – 179 Dark blue
180 – 189 Pink
190 – 255 All on
000 – 009 No function
010 – 029 Auto program 1
030 – 049 Auto program 2
050 – 069 Auto program 3
070 – 089 Auto program 4
090 – 109 Auto program 5
110 – 129 Auto program 6
130 – 149 Auto program 7
150 – 169 Auto program 8
170 – 255 Auto program 9
000 – 255 Speed auto program, increasing
000 – 009 No function
010 – 049 2700K
050 – 089 3200K
090 – 129 4300K
130 – 169 5600K
170 – 209 6500K
210 – 255 8000K
38/40
00156821, Version 1.1