Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before start-up
Let the appliance in a vertical position for at least 2 hours before ope-
rating it so that oil will flow into the compressor.
• Before connecting and using the appliance, wash the interior with lu-
kewarm water and some mild soap so as to remove the typical smell of
a brand-new product, then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.
• Remove any tape and buffers used for transport purposes.
Control panel
1 Pilot light (green)
2 Thermostat
3 Quick-freeze light (yellow)
4 Quick-freeze switch
5 Warning light (red)
Operation
• Insert the plug into the wall socket and turn the thermostat knob (2)
clockwise after the position ´-16°C. Thermostat knob is on freezer work
surface.
• The pilot lights (1), (3) and (5) will light up.
After switch-on, the appliance electronic control automatically swit-
ches off quick-freeze function after 5 hours (yellow light).
To stop operation, simply turn the thermostat knob (2) to position •.
9
Werbung
Kapitel
Inhaltsverzeichnis
