AEG Electrolux AU 86055-6I Gebrauchsanweisung Seite 24

Two cabinet securing brackets are supplied with the installation pack. They
need to be assembled onto the cabinet prior to cabinet being pushed into
the Kitchen aperture.
1. To fit these brackets remove the
two screws at the top left and right
hand front corners of the cabinet.
2. Position the two brackets
as shown in the figure and re-
place the two securing
screws.
3. Push the appliance
into place. The plug soc-
ket necessary for con-
nection of the appliance
to the electricity supply
should be positioned, so
that the plug is not pla-
ced in the recess.
4. To adjust the height
proceed as follows:
Loosen or tighten the
two front feet.
The rear feet are adjusted by
turning the screw in the front kick plate to the left or right.
24