Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Building-in
Electrical connection
8
See installation instructions supplied.
Please check whether, after installing your appliance and spe-
cially after rehingeing the door, the door seal seals right round.
An untight door seal may lead to heavy frosting and thereby to
a higher power consumption (see also „What to do if...").
A correctly installed, earthed socket is required for the electrical
supply.
The supply must have a fuse rating of at least 10 Amps. If the
socket is not accessible once the appliance is built in, the electri-
cal installation must include suitable means of isolating the ap-
pliance from the mains (e.g. a fused spur).
Before initial start-up, refer to the appliance rating plate to
ascertain if supply voltage and current values correspond with
those of the mains at the installation location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
Werbung
Kapitel
Inhaltsverzeichnis
