JUNO JGI 4429 Gebrauchsanweisung Seite 20

Fasten the appliance with 4 screws provided in the
kit included with the appliance.
Apply covers (C-D) on joint cover lugs and into hinge
holes.
Snap vent grille (B) and hinge cover (E) into
position.
C
D
E
Separate parts Ha, Hb, Hc, Hd as shown in the
figure
PR266
20
I
B
Hb
Ha
Hc
Hd
Place guide (Ha) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes. After having drilled
holes, fix the guide with the screws supplied.
ca. 50 mm
ca. 50 mm
Fix cover (Hc) on guide (Ha) until it clips into place.
Hc
PR33
Open the appliance door and the furniture door at
90°. Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the furniture
door and mark the holes as indicated in the figure.
PR167
90°
90°
Ha
8mm
Ha
Hb