Safety Instructions For Brush Tools; Residual Risks - Parkside Pfba 20-Li C3 Originalbetriebsanleitung

GB MT
quid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack or
tool that is damaged or modi-
fied. Damaged or modified batter-
ies may exhibit unpredictable be-
haviour resulting in fire, explosion
or risk of injury.
f) Do not expose a battery pack or
tool to fire or excessive temper-
ature. Exposure to fire or temper-
ature above 130 °C may cause ex-
plosion.
g) Follow all charging instructions
and do not charge the battery
pack or tool outside the temper-
ature range specified in the in-
structions. Charging improperly or
at temperatures outside the spe-
cified range may damage the bat-
tery and increase the risk of fire.
6. SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the
safety of the power tool is main-
tained.
b) Never service damaged battery
packs. Service of battery packs
should only be performed by the
manufacturer or authorized service
providers.
Safety instructions for
brush tools
• Brushes may not be attached to
machines whose speed is high-
er than the maximum permissible
brush speed.
• Damaged brushes must not be
used.
• Rust discolouration or other signs
of chemical or mechanical change
on the equipment material can
28
cause premature failure of the
brush.
• Brushes must be stored in suitable
racks, containers or boxes so that
they are protected against the fol-
lowing influences:
• High levels of humidity, heat,
water or other liquids, which
could cause damage to the
brush.
• Acids or vapours of acids that
could cause damage.
• Temperatures that are so low
that they could lead to condens-
ation on the brushes if they are
stored in an area with higher
temperatures.
• Deformation of any brush com-
ponent.

Residual risks

There will always be residual risks
even if you operate this device ac-
cording to the instructions. The fol-
lowing hazards may occur in connec-
tion with the type and design of this
device:
• Eye damage if no suitable eye pro-
tection is worn.
• Hearing damage if suitable ear pro-
tection is not worn.
• Health injuries resulting from the
effect of hand/arm vibration in the
event that the tool is used over a
longer period of time or is not used
and maintained properly.
WARNING! Danger due to elec-
tromagnetic field generated while the
tool is in operation. Under certain cir-
cumstances, this field may negat-
ively affect active or passive med-
ical implants. In order to reduce the
danger of serious or fatal injuries, we
recommend that individuals who wear
medical implants should consult their