Meaning Of The Safety Information; Pictograms And Symbols; General Power Tool Safety Warnings - Parkside Pfba 20-Li C3 Originalbetriebsanleitung

tailed description of the charging pro-
cess and further information can be
found in these separate operating in-
structions.
Meaning of the safety
information
DANGER! If you do not observe
this safety instruction, an accident will
occur. The result of which is severe
bodily injury or death.
WARNING! If you do not observe
this safety instruction, an accident
may occur. The result of which is
likely severe bodily injury or death.
CAUTION! If you do not observe
this safety instruction, an accident
will occur. The result of which is likely
minor or moderate bodily injury.
NOTICE! If you do not observe this
safety instruction, an accident will oc-
cur. The result of which is possible
damage to property.

Pictograms and symbols

Symbols on the device
The device is part of the
X 20 V TEAM series and can be
operated with batteries of the
X 20 V TEAM series. Batteries of
the X 20 V TEAM series may only
be charged using chargers of the
X 20 V TEAM series.
Read the instruction manual
Waste electrical and electron-
ic equipment (WEEE) must not
be disposed of with domestic
waste.
Attention!
Use eye protection and hearing
protection
Use protective gloves
Use of the device in the rain or
a damp environment is prohib-
ited.
Risk of injury due to ejected
parts!
Keep persons in the vicinity
away from the device
Injury hazard caused by rotat-
ing tool! Keep away from feet
and hands.
Guaranteed sound power level
L in dB.
WA
80
Symbols used in the instruction
manual
Attention!
General Power Tool Safety
Warnings
WARNING! Read all safety warn-
ings, instructions, illustrations and
specifications provided with this
power tool. Failure to follow all in-
structions listed below may result in
electric shock, fire and/or serious in-
jury. Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings
refers to your mains-operated (cor-
ded) power tool or battery-operated
(cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable li-
quids, gases or dust. Power tools
GB MT
25