EnGLIsh
PRUNER
SFMCPP632
Congratulations!
You have chosen a STANLEY FATMAX tool. Years of experience,
thorough product development and innovation make STANLEY
FATMAX one of the most reliable partners for consumer power
tool users.
Voltage
Type
Battery type
Cut capacity
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum)
L
(emission sound pressure level)
pA
K (uncertainty for the given sound level)
L
(sound power level)
WA
K (uncertainty of measured sound power level)
Vibration emission value a
=
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841‑1 and ISO 11680 with no‑load condition and
may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However, if the tool
is used for different applications, with different accessories or is
poorly maintained, the vibration and/or noise emission may differ.
This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
EC‑Declaration of Conformity
o
Machinery Directive
Pruner
SFMCPP632 Type 1
We, the manufacturer as stated below, declares that these
products described under Technical Data are in compliance
24
with:
2006/42/EC, EN62841‑1:2015 +A11:2022, EN ISO 12100:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact us at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
SFMCPP632
file and makes this declaration on behalf of the manufacturer.
V
18
DC
1
Li‑Ion
mm
32
Markus Rompel
Vice President of Engineering Europe
kg
3.2
Stanley Black and Decker Deutschland GmbH
Stanley, Richard‑Klinger‑Straße 11,
65510 Idstein, Germany
dB
50
15.01.2025
a
dB
3
dB
68
dB
3
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
m/s
2
0.3
word. Please read the manual and pay attention to these symbols.
m/s
1.5
2
which, if not avoided, will result in death or serious injury.
if not avoided, could result in death or serious injury.
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
GENERAL POWER TOOL SAFETY WARNINGS
and specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire and/
or serious injury.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b ) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c ) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous situation
WARNING: Indicates a potentially hazardous situation which,
CAUTION: Indicates a potentially hazardous situation which,
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: Read all safety warnings, instructions, illustrations
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE