Mounting The Led Panel; Mounting The Decorative Screen; Check The Installation - Create Wind Modern Bedienungsanleitung

M OU NT IN G TH E LE D PANE L
Connect the single plug of the connecting plate to the LED panel and then attach the LED
panel to the decorative plate using its magnets.
M OUN TI N G TH E DECO R AT I VE SCRE E N
Once the LED panel has been correctly positioned, fit the decorative screen of the LED
panel by screwing it onto the motor connection panel.
C H ECK THE I NSTALL AT IO N
• Check the correct operation of the ceiling fan, checking that no strange movement or misalign-
ment is observed in any part of the fan.
• In the event that some kind of hum / vibration can be seen, you can proceed to adjust the blades
with the shooting kit.
• This kit has self-adhesive weights and "u" shaped clips.
• Turn off the ceiling fan.
• You can put the clip in the center of any blade and check if the vibration decreases.
• Turn on the fan and check. If no change is seen, turn off the fan and add another clip to a differ-
ent blade or use the adhesive weights.
E NGL I SH
14
Plug socket
LED Panel