Werbung
MAINTENANCE
Removing / Attaching the cover
EN
The cover of the iRAID is very easy to remove. There are two fastening points on the front of the cover.
Release these points and gently pull the front part of the cover off.
On the sides of the wheelchair there are plastic parts which are used to attach the cover. Simply pull
gently to remove the cover.
To put the cover back on, do the reverse process.
For the sides, place the pieces in the groove.
Cleaning
The cover can be machine washed using mild detergent at a maximum temperature of 30°. Please
observe the washing instructions on the label of the cover.
Do not tumble dry as the upholstery may separate from the fabric.
Do not expose the upholstery to the sun for long periods of time, when the seat is not in use cover it or
store it in the luggage compartment.
The plastic parts can be cleaned with a damp cloth and neutral detergent.
24
Werbung
