Battery Installation & Replacement - Sunny Smart Mini Exercise Bike Bedienungsanleitung

BATTERY INSTALLATION & REPLACEMENT
31
BATTERY INSTALLATION:
1. Take out 2 AAA batteries from the manual bag.
2. Remove the Meter (No. 31) from Main Frame (No. 1). Then disconnect the Sensor
Wire (No. 32) from the Meter (No. 31).
3. Install 2 AAA batteries into the battery case on the back of the Meter (No. 31). Pay
attention to the battery + and – poles before installing.
4. Insert the Sensor Wire (No. 32) into the hole on the back of Meter (No. 31).
5. Attach the Meter (No. 31) onto the Main Frame (No. 1).
The installation is complete!
BATTERY REPLACEMENT:
1. Remove the Meter (No. 31) from Main Frame (No. 1). Then disconnect the Sensor
Wire (No. 32) from the Meter (No. 31).
2. Remove the 2 old AAA batteries from the battery case and install 2 new AAA batteries
into the battery case on the back of the Meter (No. 31). Pay attention to the battery +
and – poles before installing.
3. Insert the Sensor Wire (No. 32) into the hole on the back of Meter (No. 31).
4. Attach the Meter (No. 31) onto the Main Frame (No. 1).
The replacement is complete!
NOTE: Dispose battery according to your state and regional guidelines.
31
BATTERIES
BATTERIES
31
32
7
1