Werbung
We value your experience using Sunny Health and Fitness products. For assistance with parts
or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
1
#13L
"-20 1PC
2
1
#13R
"-20 1PC
2
#34
#35
S13-S14-S15
S17-S19
24L
2
24L
34
2
13L
24L
34
35
13L
1
2
24R
13R
2
24R
34
35
34
13R
24R
2
STEP 2:
NOTE: The Left & Right Pedals (No. 24L
& No. 24R) are marked "L" and "R" for Left
and Right.
WARNING! Read instructions carefully as
improper assembly may cause permanent
damage to your bike.
Remove the Left & Right Nylon Nuts (No.
13L & No. 13R) located on the Left &
Right Pedals (No. 24L & No. 24R).
Align the Left Pedal (No. 24L) with the
left side of Crank Arm (No. 2) at 90°.
Gently insert the Left Pedal (No. 24L) into
the Crank Arm (No. 2) and turn the Left
Pedal (No. 24L) counter-clockwise as
tightly as you can with your hand. Use
Spanner (No. 34) to tighten and secure.
Turn the Left Nylon Nut (No. 13L)
clockwise as tightly as you can with your
hand. Use Spanner (No. 34) to hold the
pedal bolt on the Left Pedal (No. 24L) and
use Spanner (No. 35) to turn the Left
Nylon Nut (No. 13L) clockwise at the
same time, until it is tightened on to the
Crank Arm (No. 2).
Align the Right Pedal (No. 24R) with the
right side of Crank Arm (No. 2) at 90°.
Gently insert the Right Pedal (No. 24R)
into the Crank Arm (No. 2) and turn the
Right Pedal (No. 24R) clockwise as tightly
as you can with your hand. Use Spanner
(No. 34) to tighten and secure.
Turn the Right Nylon Nut (No. 13R)
counter-clockwise as tightly as you can
with your hand. Use Spanner (No. 34) to
hold the pedal bolt on the Right Pedal (No.
24R) and use Spanner (No. 35) to turn the
Right Nylon Nut (No. 13R) counter-
clockwise at the same time, until it is
tightened on to the Crank Arm (No. 2).
4
Werbung
