Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Error codes and flashing sequences
9 Error codes and flashing sequences
Flashing code
Short orange flashes
(every 10 seconds)
Short orange flashes
Green flashing (1 s each)
1x long green light
1x long red flash
6x long red flashes
1x orange and 1x green light
(after inserting batteries)
Alternating long and short
orange flashing
System LED (indicates the switching status of the internal actuator)
Continuous green light
LED off
Main lens LED
Brief red flashing (approx. 1 s) Visualisation of a detected movement in zone 1
Brief green flashing (approx. 1 s) Visualisation of a detected movement in zone 2
Brief blue flashing (approx. 1 s) Visualisation of a detected movement in zone 3
Brief yellow flashing
(approx. 1 s)
Brief magenta
flashing (approx. 1 s)
Brief turquoise flashing (ap-
prox. 1 s)
Brief white flashing (approx.
1 s)
Meaning
Pairing mode active
(for 3 minutes)
Transmission attempt
or transfer of configu-
ration data
Function test
Transmission con-
firmed
Process failed (pair-
ing or reset to factory
settings).
Device defective
Test display
Software update
(OTAU)
Actuator is switched on
Actuator is switched off
Visualisation of a detected movement in zone 1 + 2
Visualisation of a detected movement in zone 1 + 3
Visualisation of a detected movement in zone 2 + 3
Visualisation of a detected movement in zone 1, 2
+ 3
Solution
Enter the last four digits of
the device serial number to
confirm
(see „9 Error codes
and flashing sequences" on
page
30).
Wait until the transfer
is complete.
Please wait until the func-
tion test has finished after
10 minutes
(see „9 Error
codes and flashing se-
quences" on page
You can continue opera-
tion.
Please try again.
Please see the display on
your app for error messag-
es or contact your retailer.
You can continue once the
test display has stopped.
Wait until the update is
completed.
30).
30
Werbung
