Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Start-up
Figure 5
• Pierce one (or more) cable in-
let(s) using a suitable object, e.g. a
screwdriver.
Figure 6
• Strip 11 mm of insulation from the
cable.
Figure 7
• Measure the distance between the
mounting holes (H) and drill the
holes.
• Insert the dowels (included in the
package contents).
• Thread the power supply cable(s)
through the cable inlet of the
mounting plate.
The sheath insulation should be
inserted at least 5 mm into the
device to ensure the water-tight-
ness of the device.
Figure 8
• Position the mounting plate with
the "TOP" mark and the arrow
pointing upwards at a suitable
point on a wall.
11 mm
26
Werbung
