Parkside Performance PDSSAP 20-Li D3 Bedienungsanleitung Seite 18

˜ Operation
˜ Inserting/removing the
battery pack
WARNING! Risk of injury due to
m
unintentional start‑up!
Only insert the battery pack
u
the product is fully prepared for use .
NOTICE! Risk of property damage
m
and damage to the product!
An incorrect battery pack can
u
damage the product and the battery
pack .
Inserting the battery pack
1 . Push the battery pack
guide into the battery pack holder
2 . Ensure the battery pack
audibly in place .
Removing the battery pack
1 . Press the release button
battery pack .
[ 7 ]
2 . Pull the battery pack
battery pack holder
˜ Selecting the speed level
Press to choose between
[ 14 ]
o
4 speed levels.
The selected speed level is indicated
o
on the speed level display
Level Max.
no‑load
rotation
speed
1 1,900 min
−1
2 2,400 min
−1
3 3,050 min
−1
4 3,600 min
−1
once
[ 7 ]
along the
7 ] [
6 ] [
clicks
7 ] [
on the
11 ] [
out of the
7 ] [
.
6 ] [
.
13 ] [
Max. Torque
impact
rate
1,200 min 120 N m
−1
2,400 min 150 N m
−1
3,800 min 190 N m
−1
4,300 min 226 N m
−1
˜ Setting the rotational
direction
(Fig. E)
NOTICE! Risk of product damage!
m
Only operate the rotational direction
u
switch
[ 3 ]
stopped .
NOTE
The directional information in this
u
section should be interpreted as
meaning that the user is positioned
behind the product .
Set the rotational direction switch
o
to one of the 3 positions:
.
Position of the
rotational direction
switch
[ 3 ]
Left
Middle
Right
˜ Switching on/off
WARNING! Risk of injury due
m
to unintentional continuous
operation of the product!
Before inserting the battery pack
u
check that the on/off switch
works properly and returns to the
OFF position when released .
Switching on
1 . Insert the battery pack
"Inserting/removing the battery pack").
2 . Set the rotational direction (see
"Setting the rotational direction").
when the product has
Rotational
direction
Clockwise
On/off switch
locked
Counter-
clockwise
15 ] [
(see
7 ] [
3 ] [
15 ] [
,
7 ] [
GB 17