FLAEM NebulFlaem 4.0 Bedienungsanleitung Seite 10

DURATION
Model: CONDOR F2000
(Compressor unit)
Model: RF9-1
(Nebuliser and accessories)
EQUIPMENT AND MATERIAL INFORMATION
The equipment includes:
Compressor unit - Model: CONDOR F2000
A1 - Switch
A2 - Air intake
A3 - Air lter
A -
A4 - Nebuliser holder
A5 - Carrying handle
A6 - Power cable
A7 - Cable storage compartment
Nebuliser and accessories - Model: RF9-1
B1 -Connecting tube (compressor/nebuliser unit)
B2 - RF9 Nebuliser
B2.1 - Lower part
B2.2 - Nozzle
B2.3 - Upper part
B2.4 - Complete particle size regulator
B2.4a - Regulator
B -
B2.4b - Valve
B2.4c - Selector
B3 - Mouthpiece Mouthpiece with valve
B3.1 - Expiratory valve
B3.2 - Non-invasive nosepiece
B4 - Adult SoftTouch mask
B5 - Paediatric SoftTouch mask
B6 - Nebulization manual control
IMPORTANT NOTE: There is an identi cation label on the packaging, remove it and a x it in
the spaces provided on page 2. When replacing the Nebuliser and accessories, perform the
same procedure.
ASSEMBLING THE NEBULISER
Follow the assembly instructions below.
1. Assemble the nozzle (B2.2) on the upper part (B2.3).
B2.3
B2.2
Service life 2000 hours.
The expected average life is 1 year, however it is advisable to replace the
nebuliser every 6 months during intensive use (or sooner if the nebulis-
er is clogged) to ensure maximum therapeutic e ectiveness.
10
Information on materials
Polypropylene
Polypropylene +
Thermoplastic Elastomers
Polypropylene
B2.3
B2.2