Midea MDRB489FGE Bedienungsanleitung Seite 13

4. Take off freezing chamber door, dismantle bottom hinge, hole caps. Install shaft
of bottom hinge on the other side and install the bottom hinge on the other side
of bottom beam.
EN EN
5. a) Remove the upper cover of refrigerating chamber door, install the upper
hinge sleeve, door signal line to the other side and install the door upper cover.
Dismantle the stopper and sleeve pipe from the right bottom of freezing chamber
door, take out another spare stopper (for reversible door), and assemble the
sleeve pipe and spare stopper on left bottom of door by screw install the upper
hinge sleeve, door signal line to the other side and install the door upper cover.
b) Dismantle the stopper and sleeve pipe from the right bottom of freezing
chamber door, take out another spare stopper (for reversible door), and
assemble the sleeve pipe and spare stopper on left bottom of door by screw.
Take off the sleeve pipe and hole caps on the freezing chamber door and mount
it on the other side.
door upper cover
door signal line
sleeve pipe
stopper
stopper screw
a
shaft
bottom hinge
sleeve pipe
08
shaft
hole cap
sleeve pipe
stopper
stopper
screw
b