Midea MDRB489FGE Bedienungsanleitung Seite 18

Display
• When power on the refrigerator for the 1st time, the whole dispaly panel will shine
for 3 seconds. Then the dispaly panel enters the normal display. Open door display
light on; When the door closes, the display light goes out. The first time for using the
refrigerator, the default set temperatures of refrigerating chamber is 5°C.
• When the error occurs, the display panel shows the error code. Otherwise, the display
panel shows the set temperature.
Temperature setting
• Press the temperature up button " " can adjust the temperature, each click of the
temperature up button " ", the set temperature will be rised 1°C; Press the temperature
down button " " can adjust the temperature, each click of the temperature down
button " ", the set temperature will be reduced 1°C; The temperature setting range
of refrigerating chamber is 2~8°C. When the temperature is adjusted to the boundary
value, the refrigerator will sound an alarm if the temperature up button " " or the
temperature up button " " still have been pressed.
Set the mode
• Set the Super cooling mode: after the temperature of the refrigeration room is
adjusted to 2°C, press the temperature down button " " to enter the super cooling
mode. In the super cooling mode, the temperature of the refrigerating chamber is
automatically set to 2°C.
• Exit the Super cooling mode: press the temperature up button " " to exit the super
cooling mode or automatically exit the super cooling mode after 6h. After exiting the
super cooling mode, the temperature of the refrigerator will automatically return to
the temperature set before the super cooling mode.
Opening alarm control
• If the door is not closed in two minutes, the buzzer will sound untill the door is closed.
Press any one button to stop the buzzer alarm.
Temperature adjustment can exit from the rapid cooling mode
13
EN EN