Neonate BC-8000DV Kurzanleitung Seite 9

Pairing BC-6500D/BC-6900D baby unit to
BC-8000DV parent unit
Baby unit BC-6500D/BC-6900D: Press and
A
hold the (PAGE) button and set the (ON/
OFF) switch to ON position. Do not release
(PAGE) button before PAIR appears in
display.
Parent unit BC-8000DV: Follow step 2, 3
B
and 4.
Baby unit BC-6500D/BC-6900D: Choose
C
same baby unit number as on parent unit
BC-8000DV by using (-/+), then press
(M) button twice. Parent unit BC-8000DV
display shows 6X00D CONNECTED.
Parent unit: Press and hold the (•) button for
2
2 seconds to enter the menu
(Parent unit must be turned on and touch
sensitive buttons activated)
Parent unit: Use the (-/+) buttons to navi-
3
gate (up/down) and select CONNECTING
in menu. Confirm choice by pressing (•)
button. If you like, you can now change the
number to the baby unit you would like to
pair – 1, 2, 3 or 4 – default is 1. Changing
baby unit number is not necessary if desired
number already is chosen and displayed to
the right of BABY in menu.
Parent unit: Use the (-/+) buttons (up/down)
4
to navigate and select CONNECTED in
menu. Confirm choice by pressing (•) but-
ton. The menu text will now change from
CONNECTED to CONNECTING... and
back to CONNECTED again when units are
paired and are connected.
How does the different modes work?
AUDIO ONLY mode – LCD display is off, when
baby is making noise, only sound is transmitted
to parent unit
Advantages:
Reduced battery consumption and radiation
to a minimum. Provides the maximum audio
range when needed.
Disadvantages:
Less visual warning (no LCD) when there is
sound from the baby.
LCD ON/OFF mode – LCD is always on and
video signal is transmitting continuously, sound
is transmitted to parent unit only when baby is
making noise. You can choose in main menu
how long the LCD stays on before the LCD turns
off automatically (default is 30 seconds).
Advantages:
Gives you opportunity to check the baby
(visually) even if there is no noise activating
the camera/baby unit
Disadvantages:
When LCD is activated, video is transmit-
ting continuously which is increasing both
battery consumption and radiation. Use this
mode in as short periods of time as possible.
VIDEO VOX mode - LCD display is activated
and is transmitting both video and sound when
baby is making noise
Advantages:
Gives you an effective battery consumption
combined with an extra visual warning from
any activity from the baby.
Disadvantages:
If there is a lot of noise coming from the
baby (or if baby unit's microphone is set
too high), the LCD display will be activated
often which leads to increased battery
consumption and radiation.
9