Neonate BC-8000DV Kurzanleitung Seite 16

ENGLISH
Turn on/off vibration
Prerequisites:
Parent unit must be turned on
Touch sensitive buttons must be activated
(are activated/deactivated by ON/OFF
button)
Parent unit: Press and hold the (•) button for
1
2 seconds to enter the menu
Parent unit: Use the (-/+) buttons to navigate
2
(up/down) and select VIBRATION in menu.
Activate choice by pressing (•) button. Now
use the (-/+) buttons to choose whether
vibration should be ON or OFF. Confirm
choice by pressing (•) button.
Turn on/off key tone
Prerequisites:
Parent unit must be turned on
Touch sensitive buttons must be activated
(are activated/deactivated by ON/OFF
button)
Parent unit: Press and hold the (•) button for
1
2 seconds to enter the menu
Parent unit: Use the (-/+) buttons to navigate
2
(up/down) and select KEY TONE in menu.
Activate choice by pressing (•) button. Now
use the (-/+) buttons to choose whether key
tone should be ON or OFF. Confirm choice
by pressing (•) button.
16
Changing between baby units in transmit
mode
Prerequisites:
The units must be paired and within commu-
nication range
Baby unit must be turned on
Parent unit must be turned on
More than one baby unit is transmitting
sound/image to parent unit simultaneously
Parent unit: Press the (BU#) button to select
from which baby unit you would like hear sound
and see image from (in addition to temperature,
battery status and signal strength).
When sound is transmitted from baby unit to
parent unit, a LED diode above the LCD display
on parent unit will be lit constantly. There are
four LED diodes with different colours (blue,
green, red and white). The colour of the LED
diode indicates which baby unit that is currently
transmitting sound. If more than one baby unit is
transmitting sound at the same time, one of the
LED diodes will be lit constantly, while the other
LED diodes will be flashing. A LED diode which
is flashing indicates the baby unit is receiving
sound from baby but cannot be heard in the
parent unit's speaker. A LED diode lit constantly
indicates the baby unit which is transmitting
sound and image (only audio in audio mode)
and can be heard in the parent unit's speaker and
viewed in parent unit's LCD display (only audio
in audio mode). If all baby units transmit sound
simultaneously, the sound/image from baby unit
no. 1 has priority over baby unit no. 2, which
again has priority over baby unit no. 3 and so on.
BU 1 = blue
BU 2 = green
BU 3 = red
BU 4 = white