Neonate BC-8000DV Kurzanleitung Seite 8

ENGLISH
Pairing (connecting) units / Disconnecting
paired units
NOTE! PU and BU are already paired and
ready to use out of the box. Nevertheless, we
recommend you to pair the units again to ensure
a private connection. If you want to connect an-
other baby unit (or extra baby unit) to the parent
unit you need pair the units again.
Prerequisites:
Baby unit must be switched off.
Parent unit must be turned on.
Touch sensitive buttons must be activated
(are activated / deactivated by ON / OFF
button)
Baby unit: Press and hold the (POWER)
1
button for 6 seconds until the «LINK»
symbol is flashing rapidly. (The «LINK»
symbol is flashing and pairing is possible
for 30 seconds)
Parent unit: Press and hold the (•) button for
2
2 seconds to enter the menu
(Parent unit must be turned on and touch
sensitive buttons activated)
8
Parent unit: Use the (-/+) buttons to navi-
3
gate (up/down) and select CONNECTING
in menu. Confirm choice by pressing (•)
button. If you like, you can now change the
number to the baby unit you would like to
pair – 1, 2, 3 or 4 – default is 1. Changing
baby unit number is not necessary if desired
number already is chosen and displayed to
the right of BABY in menu.
Parent unit: Use the (-/+) buttons (up/down)
4
to navigate and select CONNECTED in
menu. Confirm choice by pressing (•) but-
ton. The menu text will now change from
CONNECTED to CONNECTING... and
back to CONNECTED again when units are
paired and are connected.
Repeat step 1-4 if you wish to pair more baby
units to the same parent unit. If more than one
baby unit is paired, you must choose different
baby unit numbers in step 3
If you wish to disconnect a baby unit which is
already paired with parent unit, just repeat step
2-4. When you confirm by pressing (•) button
(step 4), the menu text will now change from
CONNECTED to DISCONNECTED.