Neonate BC-8000DV Kurzanleitung Seite 18

ENGLISH
Alarms / Alerts
«OUT-OF-RANGE» alarm/alert is activated af-
ter approximately 30 seconds if baby- and parent
unit is beyond communication range, when baby
unit is turned off or if baby unit for some reason
is unable to send signal to parent unit (e.g. if
battery is completely empty). The sound alarm is
activated, LCD-display shows «BOTH VIDEO
AND AUDIO OUT OF RANGE» and the «LED
level meter» light flashes.
Note!
If parent unit loses contact with a baby unit
while it picks up sound from another baby
unit, the "OUT-OF-RANGE" alarm will not
be activated as long as sound is transmitting
from one baby unit.
Because the video signal has a shorter range than
the audio signal, the video signal falls outside the
maximum transmit range easily than the audio
signal. When the video signal is out of reach
but the audio signal is in range, the sound signal
from the child can be transmitted and notify the
parents, you will see the following notification in
the parent unit's display;
«VIDEO OUT OF RANGE AUDIO STILL IN
RANGE»
«VIDEO OUT OF RANGE AUDIO STILL IN
RANGE» displayed in different modes;
AUDIO ONLY mode
- Never (only sound is transmitted in this
mode)
VIDEO VOX mode
- Only when sound is received from baby
unit
18
LCD ON/OFF mode
- Always (LCD ON means that video signal
is transmitted continuously)
TEMPERATUR alarm sound is activated and text
is shown in parent unit's display if;
the actual temperature exceeds the selected
1
high temperature limit - display shows:
BABY #
HIGH TEMPERATURE ALARM
(# = number of baby unit that is registered too high temperature)
the actual temperature goes below the
2
selected low temperature limit - display
shows:
BABY #
LOW TEMPERATURE ALARM
(# = number of baby unit that is registered too low temperature)