Neonate BC-8000DV Kurzanleitung Seite 10

ENGLISH
Turn on and adjusting the temperature
alarm (upper and lower limit)
Prerequisites:
Parent unit must be turned on
Touch sensitive buttons must be activated
(are activated / deactivated by ON / OFF
button)
Parent unit: Press and hold the (•) button for
1
2 seconds to enter the menu
Parent unit: Use the (-/+) buttons to select
2
TEMP ALARM in menu. Confirm choice
by pressing (•) button. Now choose HIGH
LIMIT or LOW LIMIT and confirm choice
by pressing (•) button. Now use the (-/+)
buttons to select the upper or lower tem-
perature limit. Confirm choice by pressing
(•) button
If current temperature exceeds the chosen upper
temperature limit, the temperature alarm will be
activated.
If current temperature goes below the chosen
lower temperature limit the temperature alarm
will be activated.
If you would like to change the temperature limit
on a different baby unit, then you need to change
the number to the right of BABY (showing
BABY 1 in below picture).
10
Zoom funksjon
Prerequisites:
The units must be paired and within commu-
nication range
Baby unit must be turned on
Parent unit must be turned on and LCD ON
mode activated
Touch sensitive buttons must be activated
(are activated / deactivated by ON / OFF
button)
Parent unit: Press the (•) button, LCD display
will show «ZOOM X1», you can now use (-/+)
buttons to zoom in/out. Press (+) to zoom in
(LCD display will now show «ZOOM X2»).