VEVOR RP-25 Anweisungen Seite 7

When the handle moves
upward, the water
cannot be sucked up.
The handle is weak
when moving up and
down.
The pressure gauge
shows that the pressure
is unstable.
Special attention:
Do not use in workplaces with acid, alkali and corrosive substances.
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
EC REP: SHUNSHUN GmbH.
Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany
Tel: +49 1727041930
UK REP: Pooledas Group Ltd.
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
Tel: 01772418127
Imported to AUS: SIHAO PTY LTD.
1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd.
Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Made In China
FAILURE RECOVERY
1. Check whether the suction pipe is blocked
by garbage.
2. Check whether the switch is tightened.
1. Check whether the switch is tightened.
2. Check whether the sealing ring of the
piston shaft is damaged.
3. Check whether the check valve in the outlet
joint is unclean.
1. If there is leakage in the pipeline or outlet
joint, the sealing ring should be replaced.
2. the meter rod connection leakage, replace
the sealing country.
3. pressure gauge damage, repair pressure
gauge.
euvertreter@gmail.com
pooledas123@gmail.com
- 6 -