Werbung
Verfügbare Sprachen
Verfügbare Sprachen
22
PHARA-O MINI
Getting Started
PHARA-O MINI
(EN) Step 3: Getting Started
OVERVIEW
This 'getting started' guide will help you set up your PHARA‑O MINI and briefly
introduce its capabilities.
CONNECTION
To connect the PHARA‑O MINI to your system, please consult the connection guide
earlier in this document.
SOFTWARE SETUP
The PHARA‑O MINI is a USB Class Compliant MIDI device, and so no driver
installation is required. The PHARA‑O MINI does not require any additional drivers
to work with Windows and MacOS.
HARDWARE SETUP
Make all the connections in your system. Keep the PHARA‑O MINI power turned off
when making any connections.
Ensure your sound system is turned down.
Turn on the PHARA‑O MINI before turning on any power amplifiers and turn it
off last. This will help prevent any turn on or turn off "pops or thumps" in
your speakers.
WARM UP TIME
We recommend leaving 15 minutes or more time for the PHARA‑O MINI to warm
up before recording or live performance. (Longer if it has been brought in from
the cold.) This will allow the precision analog circuits time to reach their normal
operating temperature and tuned performance.
After power up the PHARA‑O MINI will run a calibration routine for around 30
seconds to ensure that all oscillators are correctly tuned. If at any point during
operation it is felt that the oscillators have become detuned then leave the
PHARA‑O MINI for ten seconds without touching any controls or keys and the
calibration will automatically re‑run.
FIRMWARE UPDATE
Please check the behringer.com website regularly for any updates to the Behringer
SYNTHTRIBE app.
The app looks for the latest firmware file which can then be downloaded and used
to update the PHARA‑O MINI.
23
Quick Start Guide
Werbung
