Set Date And Time - Pizza Group Pyralis Gebrauchs- Und Wartungsanleitung

1) DELAY SWITCH DEACTIVATED:
- Turn on unit by pressing the ON/OFF button
- Press the CLOCK button
- Use the key or
Wait for confirmation of the set value or by pressing the button
- Turn off unit with the ON/OFF button

2) SET DATE and TIME:

- With card OFF press the CLOCK button
number from 1 to 7 (1= Monday, 7= Sunday);
- Use the button or
- In the same way also set the hours, indicated by "
After confirm the minutes with
3) SETTING PROGRAMS Pr1 and Pr2:
- With card OFF press the button
After which the program used appears for 5 seconds
green if is selected Pr1 or red if is selected Pr2.
- Select Pr1 pressing the button
- Always with the button
set the value to 300°C and confirm with
- Always with the button
set the value to 250°C and confirm with
- To select the Pr2 program press the button once
BOTTOM at 300° C.
4) DELAY SWITCH SETTING:
- Set DELAY SWITCH with card on
for 4 seconds until you see "dd";
to set the value "dd: 0" .
.
for 4 seconds until you see the day of the week
to plan the day of the week and to confirm with the button CLOCK.
hh
the card will return to OFF.
(Pr1
once
pressed for 3 seconds enable the TOP value and with the button
pressed for 3 seconds enable the BOTTOM value and with the button
until you see Pr1 or Pr2;
"and the minutes using "nn".
green or Pr2 red) and then the room temperature showed in
and repeat the sequence to set the TOP at 320° C and the
55
"dd "followed by a
or
or