Environmental Conditions - Flaem Rf9 Bedienungsanleitung

ENVIRONMENTAL CONDITIONS

Operating conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
Storage and transport conditions:
Ambient temperature
Relative air humidity
Atmospheric pressure
DURATION
Model: RF9-1 The expected average life is 1 year, however it is advisable to replace the
Nebuliser and nebuliser every 6 months during intensive use (or sooner if the nebuliser is
accessories clogged) to ensure maximum therapeutic effectiveness.
EQUIPMENT AND INFORMATION ON MATERIALS
The supply includes:
Nebuliser and accessories - Model: RF9-1
B2 - RF9 ampoule
B2.4 - Complete particle size regulator
B2.4.a - Regulator
B2.4.b - Valve
B2.4.c - Selector switch
B2.3 - Upper part
B2.2 - Nozzle
B2.1 - Lower part
B3 - Mouthpiece with valve
B3.1 - Expiratory valve
B3.2 - Non-invasive nasal piece
B4 - Adult SoftTouch mask
B5 - Paediatric SoftTouch mask
B6 - Adult nasal piece
B7 - Paediatric nasal piece
B8 - Infant set (see appropriate operating instructions)
B9 - Manual nebulisation control
B10 - Connector
IMPORTANT NOTE: There is an identification label on the packaging, remove it and affix it in the spac-
es provided on page 2. When replacing the Nebuliser and accessories, perform the same procedure.
NEBULISER ASSEMBLY
Follow the assembly instructions below.
1. Assemble the nozzle (B2.2) on the upper part (B2.3).
B2.3
B2.2
Between +10°C and +40°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Between -25°C and +70°C
Between 10% and 95%
Between 69 KPa and 106 KPa
Information on materials
Polypropylene
Polypropylene +
Thermoplastic Elastomers
Polypropylene
B2.3
B2.2
20