Standby - Quick Tools Qu862Dw+ Bedienungsanleitung

2. Into the calibration mode: When the temperature is stable, press the keys
"CH1" and "CH3" keys at the same time about 15seconds, and then the LCD
will display "cal" about two seconds and the system will enter into the
temperature calibrating mode.
Input the testing temperature after the hundreds digit twinkling.
3. Press "TEMP▲"or "TEMP▼" key to setting the data and press "AIR
▲"or "AIR▼" key to move the cursor. After inputting the testing result,
click the "CH2" key.
4. If calibration is successful, the LCD respectively displays "C-L/C-H"，if not
successful, the LCD displays "no".
5. If the temperature still has some departure, you can repeat calibration
according with the above steps.
NOTE: Suggest using 191 or 192 thermometers to measure the temperature.

2.9. Standby

2.9.1. How into the Sleeping State
1. Put the handle on the handle holder, the system will to the sleeping
state come automatically.
2. During the system from work state to sleeping state, the window will
display "Off". and then when the temperature cooling down to 100℃,
the unit comes into the sleeping state. In the sleeping state, the LCD
will display "Sleep".
2.9.2. Resume
1. When the handle is putting on the handle, it cannot be resumed from
sleeping.
2. Take down the handle from the holder. At the time, the unit will work at
once.
8
USER MANUAL