Herunterladen Diese Seite drucken

Cleanmaxx Pro+ Bedienungsanleitung Seite 16

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
WARNING – Danger of Fire!
Do not use the device in the vicinity of
highly flammable materials.
Do not cover the device during oper-
ation. Do not insert anything into the
ventilation openings of the device and
make sure that they do not become
clogged.
Do not connect the device along with
other consumers with a high wattage
to a circuit in order to prevent over-
loading and a possible short circuit
(fire). Make sure that the circuit is
designed to handle the power of the
device.
Do not use any multiple sockets,
extension cables more than 3 m long
or cable extension reels.
NOTICE – Risk of Damage to Materi-
al and Property
Make sure that the connecting cable is
not squashed, bent or laid over sharp
edges and does not come into contact
with hot surfaces.
Disconnect the device from the mains
power if a fault occurs or in a thunder-
storm.
When you disconnect the device
from the mains power, always pull on
the mains plug and never the mains
cable.
Never pull or carry the device by the
connecting cable.
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
Use and store the device at room
temperature, do not expose it to
extreme temperatures or temperature
fluctuations.
Protect the device from heat sources,
fire, persistent moisture and impacts.
16
01908_Inlay_de-en-fr-nl_A5_V1.indb 16
01908_Inlay_de-en-fr-nl_A5_V1.indb 16
Do not use if there is visible damage
to the component parts of the device.
Do not place any heavy objects on
the component parts of the device.
In the event of damage / faults, switch
the device off immediately.
Make sure that the device does not
tip over so that no water can run out
of the tanks.
ATTACHING AND
DETACHING ACCESSORIES
Handle
Attaching: Plug the handle (1) into the
recess provided for it on the device. It
must engage audibly.
Detaching: Press the locking lug on
the back of the handle and pull it up
and away from the device at the same
time.
Dirty Water Tank
Attaching: Slide the dirty water
tank (10) into the bottom compart-
ment (on the motor unit (9)) of the de-
vice until you hear it engage in place.
Detaching: Press down the handle of
the dirty water tank (11) until the tank
is detached from the device. It can
then be removed from the compart-
ment.
Opening and closing: There is a round
closure cap on the bottom. To open
the dirty water tank, twist the closure
cap anticlockwise and remove it. To
close it, insert it into the opening and
twist it clockwise to seal it shut.
Fresh Water Tank
Attaching: Place the fresh water
tank (12) in the top compartment of
the device and press it towards the
body of the device until you hear it
engage in place.
11.03.2022 12:23:38
11.03.2022 12:23:38

Werbung

loading

Diese Anleitung auch für:

Fcw-21101908