GERATHERM OXY ONE Gebrauchsanweisung Seite 33

ProDuct fEaturEs
• Lightweight, portable and easy to use.
• LED screen shows pulse rate, SpO
• Large font display.
• Low battery indicator.
• Auto shut down if no signal is detected within 30 seconds.
INtENDED PurPosE
The pulse oximeter is a reusable device and intended for spot-checking of
oxygen saturation and pulse rate for use with the finger of adult patients.
oPEratIoN INstructIoNs
1. Install two AAA batteries into battery compartment correctly.
2. Insert one of your fingers into the finger chamber of the pulse oximeter.
Note: The fingernail should be facing the top chamber (which contains
the sensor). Finger should also be inserted completely into the cham-
ber. Otherwise, measurement will be inaccurate.
3. Press the power-on button to turn on the pulse oximeter.
4. Finger and body should not tremble during measuring.
5. Read correct data from displayed screen.
6. The sound will alert the users when the blood oxygen levels fall below
the 94 % threshold.
Notes:
• When your finger is inserted into the oximeter, your nail surface must
be upward.
• The results may be wrong if you do not place your finger thoroughly in
the oximeter.
• Please use medical alcohol to clean the silicon which touches the fin-
ger inside of oximeter, and use alcohol to clean the test finger before
and after each test. (The silicon inside of the oximeter belongs to med-
ical silicon, which has no toxins and does no harm to the skin).
• The sound function is only used to remind the user to check their blood
oxygen level and is not used for any alarm purposes. Any time users
have doubts about their blood oxygen saturation, they should check
their blood oxygen measurement in time.
ProDuct accEssorIEs
1. Pulse oximeter* 1 pc
2. User manual* 1 pc
2
3. Batteries* 2 pc
4. Lanyard* 1 pc
27
EN