Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.
Troubleshoot
Problems
7-in-1 wireless sensor
array is intermittent or
is not connected
No WI-FI connection
Not able to add the
device to WSLink
After first time setup,
data is not showing
at WUnderground or
Weathercloud
Data not reporting to
WUnderground or
Weathercloud
Rainfall is not correct
Temperature reading
too high in the day time
Some condensation
beneath the UV sensor
may occur overnight
10.
Specifications
10.1
Console
General specification
Dimensions (W x H x D)
Weight
Main power
Backup battery
Operating temperature range
Operating Humidity range
Support sensor
RF frequency
Time related function specification
Time display
Hour format
Date display
Solution
1 . Make sure the sensor array is within the transmission range
2 . If it still does not work, reset the sensor pair with console again
1 . Check the WI-FI icon on the display, it should be on if
connectivity is successful
2 . In the console SETUP page, make sure the WI-FI settings
(router's name, security type, password) are correct
3 . Make sure you connect to 2 .4G band of the WI-FI router (5G not
supported)
1 . Make sure your WSLink is the latest version
2 . Make sure your device is in AP mode
3 . Make sure no other smart phone connected your device .
1 . Please note it make a few minutes to a few hours for
WUnderground or Weathercloud to validate your upload data .
2 . Try to refresh the WUnderground or Weathercloud website .
1 . Make sure the WI-FI connection of the console is good .
2 . In the console SETUP page, ensure your Station ID and Station
Key are correct
1 . Make sure the rain collector is clean for the tipping bucket to tip
smoothly
2 . Make sure the sensor has stable and level mounting to ensure
correct tipping
1 . Place the sensor in open area and at least 1.5m off the ground.
2 . Ensure that the sensor is placed away from heat generating
sources or structures, such as buildings, pavement, walls or air
conditioning units .
This will disappear when temperature rises up under the sun and
will not affect the performance of the unit.
240 x 140 x 21mm (9 .4 x 5 .5 x 0 .8 in)
464g (without battery)
DC 5V, 1A adapter
CR2032
-5˚C ~ 50˚C
RH 10~90% non-condensing
- 1 Wireless 7-in-1 weather sensor array
- 7 Wireless thermo-hygro sensor (optional)
868MHz (EU and UK)
HH : MM
12hr AM / PM or 24 hr
DD / MM or MM / DD
35
Werbung
