Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note:
If no display appears when power up the console, you can press [ RESET ] key by using a pointed object . If
this process still not work, you can remove the backup battery and unplug the adapter then re-power up the
console again .
3.4.3 Synchronizing wireless 7-in-1 sensor array
Immediately after power up the console, while still in synchronization mode, the 7-in-1 sensor
can be paired to the console automatically (as indicated by the flashing antenna ) . User may
also manually restart the synchronization mode by pressing the [ SENSOR / WI-FI ] key . Once
they are paired up, the sensor signal strength indicator and weather reading will appear on your
console display .
3.4.4 Data clearing
During installation of the wireless 7-in-1 sensor, the sensors were likely to be triggered, resulting
in erroneous rainfall and wind measurements . After the installation, user may clear out all the
erroneous data from the display console . Simply press the [ RESET ] key once to re-start the
console .
4.
Display console functions and operation
4.1
Screen Display
1 . Wind direction & speed
2 . Outdoor temperature & humidity
3 . UV index & light intensity (SUN)
4 . Weather index
5 . Time, calendar, moon phase & sunrise/sunset
6 . Weather forecast & Barometer
7 . Indoor / Ch temperature & humidity
8 . Rainfall & Rain rate
10
Werbung
