Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.6
Calibration
Settings
Wi-Fi
Edit device
Weather server
Calibration
Firmware
Confirm & Exit
(a) Settings page
At the settings page, tap "Calibration" .
(c3) Upload to customized server (optional)
1 . Prepare your customized server based on
WUnderground or WSLink API
2 . Enter the URL address, Station ID and Station key
of the customized server .
3 . Select upload interval and API type
4 . Enable (or disable) the upload .
5 . Tap "Save" .
Type in other URL such as ws .awekas .
at, www .pwsweather .com or custom
URL
Able to select different values for
seconds or minutes .
NOTE: Select upload interval according
to different server requirements (e .g .
Awekas: 15 sec ., PWS: 1 min .)
Able to select
- WUnderground API
- WSLink API
NOTE: For Awekas, PWS or any other
URL compatible with Wunderground
API, please select WUnderground API
type
Calibration
Indoor
(Display Console)
Outdoor
(Sensor Array)
CH1
CH2
CH3
CH4
CH5
CH6
CH7
Save
(b) Calibration page
1 . Tap "Unit" to change the unit if necessary
before entering the calibration value .
2 . Tap the box and enter the calibration required .
3 . Tap "Save" .
27
Unit
Indoor section
Outdoor section
Section for optional
thermo-hygro sensor(s)
(CH1 ~ CH7) .
Werbung
