Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.2
Install Wireless 7-in-1 sensor
Your wireless 7-IN-1 sensor measures wind speed, wind direction, rainfall, UV index, light
intensity, temperature and humidity for you . It's fully assembled and calibrated for your easy
installation .
3.2.1 Battery and installation
Unscrew the battery door at bottom of unit and insert the
batteries according to the +/- polarity indicated .
Screw the battery door compartment on tightly .
Note:
- Ensure the water tight O-ring is properly aligned in place to ensure
water resistant .
- The red LED will begin flashing every 12 seconds.
3.2.2 Assembly the stand and pole
Step 1
Insert the top side of the pole to the square hole of the
weather sensor .
Note:
Ensure the pole and sensor's indicator align .
Step 2
Place the nut in the hexagon hole on the sensor, then
insert the screw in other side and tighten it by the
screw driver .
5
Werbung
