fillikid BFL032 Bedienungsanleitung Seite 22

EN EN
5. Use of support leg
5. U se of support leg
5.1 Press the support leg extending handle and pull it forward to extend the support leg
5.1 Press the support leg extending handle and pull it forward to extend the support leg
5.2 Press the support leg release button to extend the support leg to the position that can
5.2 Press the support leg release button to extend the support leg to the position that
reach the vehicle floor. Ensure there is no gap between the bottom of support leg and
can reach the vehicle floor. Ensure there is no gap between the bottom of support leg
vehicle floor.
and vehicle floor.
The support leg indicator window will turn to green in case the support leg installed firmly
The support leg indicator window will turn to green in case the support leg installed
firmly
5.3 Check if the bottom of ECRS fits the vehicle seat, there shall be no gaps between
5.3 Check if the bottom of ECRS fits the vehicle seat, there shall be no gaps between bottom face of ECRS and vehicle seat surface
bottom face of ECRS and vehicle seat surface
5.4 The original angle of support leg is 90 degree, any other un-set angle is not suggested.
5.4 The original angle of support leg is 90 degree, any other un-set angle is not sugge-
It is forbidden to support on the raised vehicle floor
sted. It is forbidden to support on the raised vehicle floor