Advance SUCCESS 2+ Betriebshandbuch Seite 50

08354600_Advance_Success2+ 50
Inner container and deployment handle
The reserve should be packed in a square shape to match the size of
the supplied inner container. The handle should be looped on to the
reserve inner container. When installing the reserve make sure that
this connection (handle to container) is at the side.
First lay the bridles and line bundles in the reserve compartment then
finally place the inner container in. The closure flaps of the inner con-
tainer should lie uppermost, facing the seatboard. The reserve handle
is fixed on the right hand side of the harness. It is easy to see and ea-
sy to reach. When closing the compartment make sure the yellow re-
taining cables run cleanly, so as to guarantee a correct deployment.
Lead the yellow cable from the reserve handle through the neoprene
sleeve provided. The reserve handle should sit on the side of the har-
ness as shown; it is then clearly visible, and easy to reach.
Caution: Never connect the inner container to the reserve
parachute.
Info: You can easily loop the deployment handle supplied to
all conventional reserve inner containers.
50
10.07.2008 10:36:11 Uhr