PERFECTPRO OCT-18V Bedienungsanleitung Seite 5

User Safety Precautions
● Do not attempt to disassemble the plastic covering or
any parts of the device, as the materials inside may be
toxic and may damage skin and clothes.
● Do not puncture, crush, modify, throw or cause any
unnecessary shock to your battery, as the battery used
in this device may present a risk of fire, explosion, or
chemical burn if mistreated.
● Do not leave, charge or use the battery in a car under
direct sunlight, near fire or a heated source.
● Do not immerse or throw the battery in water / seawater.
● Do not use or charge the battery if it appears to be
abnormally hot, discolored, deformed or abnormal
GB
conditions are detected during use, charge or storage.
● Do not leave a charging battery unattended. Keep the
battery away from babies and children.
NL
● CAUTION: 'Risk of explosion if the battery is replaced
by an incorrect type.'
DE
● CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent
type.
FR
● The battery combination is stored at room temperature
(25 degrees), charged to 40%~60% of the power, charge
once every three months, for the storage of more than a
year of battery, performance cannot be guaranteed.
ES
● CAUTION: This equipment is intended for use with
an 18V BOSCH Li-ion battery pack (except for the
"ProCORE18V 12Ah").
ITA
● Intended for use with GBA BOSCH battery packs of the
same voltage class.
SV
● Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that can
result in an explosion.
DAN
● Leaving a battery in an extremely high temperature
surrounding environment that can result in an explosion
or the leakage of flammable liquid or gas.
NOR
● A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of flammable
liquid or gas.
PL
Operating with the Li-ion battery pack
(Fig. 2-4)
When powered by an 18V BOSCH Li-ion battery pack
(except for the "ProCORE18V 12Ah"), a battery symbol
will appear in the upper right corner of the screen when
the radio is turned on.
1.
Open the battery cover.
2.
To install the battery pack, align the tongue on the
battery pack with the groove in the housing and slip it
into place. Always insert it all the way until it locks in
place with two clicks.
3. To remove the battery pack, slide it from the radio while
pressing the button on the front of the battery pack.
4. Close the battery cover.
CAUTION:
● Always attach the battery pack completely. If not, it may
accidentally fall out of the battery bay, causing injury to
4
you or someone around you.
● Do not force attach the battery pack. If the battery pack
does not slide in smoothly and does not engage, it is
not being inserted correctly.
Indicating the remaining battery
capacity (Fig. 5)
1. Check button 2. Indicator lamps
Press the Check button on the battery pack to indicate the
remaining battery capacity.
Using the AC power adapter
The AC / DC Switching adapter supplied with this unit
has an output of 19V-1.8A center pin positive. Insert
the adapter plug into the DC socket on the rear of the
radio. Plug the adapter into a standard AC outlet. The AC
adapter should be disconnected from the AC outlet when
not in use for long periods of time.
Whenever the adapter is used, the battery is automatically
disconnected.
IMPORTANT:
The mains plug is used as the means of connecting the
radio to the mains supply. The mains socket used for the
radio must remain accessible during normal use. In order to
disconnect the radio from the mains completely, the mains
plug should be removed from the mains outlet completely.
Listening to DAB radio
Tuning into DAB stations
To tune into DAB radio stations, follow these steps:
1.
Turn on the radio using the Power button.
2.
Select the DAB radio mode by repeatedly pressing the
Source button.
3. If this is the first time the DAB radio mode is being
used, the radio will automatically perform a full scan in
order to find all available DAB radio stations. During
the scanning process, as new stations are detected
the station counter will increase and the stations will be
added to the list which is stored in the radio. The bar
graph indicates the progress of the scan.
4.
When scanning is completed, the radio will list all
stations that were found. Rotate the Tuning knob to
access the radio station list and to scroll through the
available stations. Then press the Tuning knob to tune
into a station.
5. Use the Volume knob to set the sound level as needed.
Note:
Before selecting the DAB radio mode and performing
a scan, make sure the DAB / FM antenna has been
positioned upright.
The DAB radio menu
You can open the DAB radio menu by pressing and
holding the Info / Menu button while the radio is in the
DAB radio mode.
Rotate the Tuning knob to select one of the options and
then press the Tuning knob to confirm your choice.