Description of functions
The cordless hand-held vacuum cleaner is
equipped with a transparent plastic con-
tainer, various nozzle attachments and
working levels for picking up dirt.
Please refer to the descriptions below for
information on how the operating ele-
ments work.
Technical data
Cordless Handheld Vacuum Clean-
er ........................... SHSA 20-Li A1
Nominal voltage U ........................ 20 V ⎓
Input current .......................................... 1 A
Weight
–Weight with battery (20 V, 2 Ah)
......................................................... ≈1.3 kg
–Weight without battery .............≈0.85 kg
Container volume
–Dust ............................................... 400 ml
–Liquid .............................................150 ml
Battery ................................................. Li-Ion
Temperature ................................... ≤50 °C
– Charging ..................................4–40 °C
– Operation ........................... −20–50 °C
– Storage .................................... 0–45 °C
PARKSIDE Performance Smart battery
Smart PAPS 204 A1/Smart PAPS 208 A1
– Frequency ƒ ..........2400–2483.5 MHz
– transmitted power .................... ≤20 dBm
Grizzly Tools GmbH & Co. KG
HRA: 5468, Amtsgericht Aschaffenburg
Stockstädter Str. 20
63762 Großostheim
GERMANY
Charger ........... GC30-2101000EU
Input voltage ........................100–240 V∼
Input AC frequency ................... 50/60 Hz
Output voltage ............................21.0 V ⎓
Output current ....................................1.0 A
Output power ................................ 21.0 W
Average active efficiency ...............86.3 %
Efficiency at low load (10 %) ........ 81.6 %
No-load power consumption ........ 0.06 W
Protection class ..... ⧈ II (double insulation)
Protection type .....................................IPX0
Motorised brush attachment
........................................ SMD 10
Rated power P ...................................10 W
Charging time
The device is part of the X 20 V TEAM
series and can be operated with bat-
teries of the X 20 V TEAM series. Bat-
teries of the X 20 V TEAM series may
only be charged using chargers of the
X 20 V TEAM series.*
We recommend that you operate
this appliance with the following bat-
teries only: PAP 20 B1, PAP 20 B3,
Smart PAPS 204 A1, Smart PAPS 208 A1
We recommend charging these batteries
with the following chargers: PLG 20 A3,
PLG 20 A4, PLG 20 C1, PLG 20 C2,
PLG 20 C3, PLG 201 A1, PDSLG 20 A1,
PDSLG 20 B1, Smart PLGS 2012 A1
Rechargeable battery and charger tech-
nical data: See separate manual.
The charging time is influenced by factors
such as the temperature of the environ-
ment and the battery, as well as the mains
voltage applied, and may therefore devi-
ate from the specified values.
* You can use the GC30-2101000EU
charger to charge the X 20 V TEAM
series batteries while they are inside the
appliance.
GB
MT
25