Approved Usage; Approval And Conformity With Ec Directives; Care Of The Unit - T+A Elektroakustik T 1210 R Betriebsanleitung

Approved usage

This device is designed exclusively for reproducing
sound and/or pictures in the domestic environment. It is
to be used in a dry indoor room which meets all the
recommendations stated in these instructions.
Where the equipment is to be used for other purposes,
especially in the medical field or any field in which safety
is an issue, it is essential to establish the unit's suitability
for this purpose with the manufacturer, and to obtain prior
written approval for this usage.
 equipment which includes a radio or television
receiving section must be operated within the stipulations
laid down by the Post Office and the Telecommunications
authorities in the country in which it is used.
This unit may only be used to receive or reproduce those
transmissions which are intended for public reception.
The reception or reproduction of other transmissions
(e. g. police radio or mobile radio broadcasts) is
prohibited.

Care of the unit:

Disconnect the mains plug at the wall socket before
cleaning the case.
The surfaces of the case should be wiped clean with a
soft, dry cloth only.
Never use solvent-based or abrasive cleaners!
Before switching the unit on again, check that there are
no short-circuits at the connections, and that all cables
are plugged in correctly.

Approval and conformity with EC directives

In its original condition the unit meets all currently valid
German and European regulations. It is approved for use
as stipulated within the EC.
By attaching the  symbol to the unit  declares its
conformity with the EC directives 89/336/EEC, amended
by 91/263/EEC, amended by 93/68/EEC, and also
73/23/EEC, amended by 93/68/EEC and the national
laws based on those directives.
The original, unaltered factory serial number must be
present on the outside of the unit and must be clearly
legible! The serial number is a constituent part of our
conformity declaration and therefore of the approval for
operation of the device.
The serial numbers on the unit and in the original 
documentation supplied with it (in particular the inspec-
tion and guarantee certificates), must not be removed or
modified, and must correspond.
Infringing any of these conditions invalidates  con-
formity and approval, and the unit may not be operated
within the EC. Improper use of the equipment makes the
user liable to penalty under current EC and national laws.
Any modifications or repairs to the unit, or any other
intervention by a workshop or other third party not autho-
rised by , invalidates the approval and operational
permit for the equipment.
Only genuine  accessories may be connected to the
unit, or such auxiliary devices which are themselves
approved and fulfil all currently valid legal requirements.
When used in conjunction with auxiliary devices or as
part of a system this unit may only be used for the purpo-
ses stated in the section 'Approved usage'.
46