Remote Control - T+A Elektroakustik T 1210 R Betriebsanleitung

A remote control unit is available for  Hi-Fi compo-
nents as an optional accessory. The handset can be
used to control the basic functions of individual units. If
you have a complete system which includes a 
series pre-amplifier or integrated amplifier, then all the
components can be controlled via a single remote control
unit. The F1 can also be used to control  televisions
and a range of standard commercial video recorders.
The next section describes the areas of the remote
control system which are relevant to the T 1210 R.
For details on operating a complete Hi-Fi system, please
read the operating instructions supplied with the
amplifier.
In general terms the buttons on the remote control
handset have the same function as the corresponding
buttons on the tuner.
The remote control unit also has additional buttons, such
as a numeric keypad, which will be explained in detail in
the following section.

Remote control

HiFi TV VCR
TUNER
1 2 3
4 5 6
7 8 9
0
OK
+
PROG
TV
MENU
SRC
A
M-PRG
F1
 'R'  

F6
TUNER
PAUSE STOP
PLAY
OK
1 2 3 1
4
4 5 6
7
7 8 9
0
SRC SRC
M
E
N
U
Note:
The F1 handset must first be set to Hi-Fi mode; this is
done by repeatedly pressing the left-hand end of the
    rocker switch until the LED above 'HiFi' glows.
34

F12
TUNER
PLAY
OK
2 3
5 6
8 9
0
M
E
N
U