Special Funktions; Radiotext; Stereo/Mono - T+A Elektroakustik T 1210 R Betriebsanleitung

The menu system is operated using the remote control
buttons   ,   ,   and 
     
   
This button opens a menu offering special functions.
Repeat pressing the button would display the menu
points in next order.

Radiotext

To switch the display to radiotext, press the remote
control buttons in the sequence shown above.
When first switched on the machine's screen displays
you see ' RADIOTEXT RADIOTEXT ' until a new message is displayed.
RADIOTEXT RADIOTEXT
If no radiotext is received for the selected station, the
screen shows the message '
second, and then resumes the normal display. When the
radiotext function is switched off, the screen returns to
normal display.
When changing the station, the radiotextmode will be
automaticly switched off.
STEREO / MONO
To change between MONO and STEREO reception
mode, press the remote control buttons in the sequence
shown above.
The selected mode is display on screen
MONO MONO
' MONO MONO ' or '
The STEREO mode is indicated by  on screen.
On far and weak stations the signalstrength will not be
strong enough to receive them in stereo mode. You will
here interferences on this station; switching in the mono-
mode will mostly reduce this interferences.
Special functions
 .
 
NO NO NO NO RTEXT RTEXT RTEXT RTEXT ' for about one
STEREO STEREO
STEREO STEREO '.
   
   
These buttons are used to make a selection or perform
any changes within the menu points.
 
 
Activates the function shown on the screen. If you have
made no change or selection in the function on the
screen, pressing   terminates the tuner special
 
functions menu.
Note:
In use of the  system handset F1 you can display the
radiotext by pressing the  button.
Note:
In use of the  system handset F1 you can use this
function by pressing the 
36
  buttom. 