Back Panel Connections - T+A Elektroakustik T 1210 R Betriebsanleitung

   
OUTPUT
The tuner output supplies a constant output signal.
It is designed for connection to a pre-amplifier or
integrated amplifier with volume control.
Connect the output sockets to the TUNER inputs sockets
(INPUT) of the pre-amplifier or integrated amplifier, taking
care to keep the channels the right way round:
'ANALOG OUTPUT L' to 'INPUT L'
'ANALOG OUTPUT R' to 'INPUT R'
 
 
FM ANT
The T 1210 R is fitted with a 75 Ω antenna input labelled
FM ANT, which is designed to match a standard
domestic antenna and cable input.
For first-class reception quality a high-performance
antenna system is indispensable.

Back panel connections

42
   
RC-IN
Remote control input to connect to a  'R' series pre-
amplifier or integrated amplifier.
 
 
R
LINK
Control input / control output sockets for the  R
system:
Both sockets are of equal status - either of the sockets
can be used as the input, and the other can then be used
as output to the next R
LINK
   
Mains input
The mains lead is connected to this socket.
For correct connections refer to the sections 'Installation
and wiring' and 'Safety notes'.
LINK
device.