Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting the set temperature
1. Deactivate the key lock, if it is active, by pressing and holding the button mode/key lock
seconds.
26
The display key lock
expires.
26
The key lock
activates automatically after 60 seconds of inactivity.
11
2. Press (repeated) the button down
or button up
15
The display temperature
flashes to indicate the desired setpoint temperature.
12
3. Press the button on/off
, to confirm your entry.
The heat pump starts as soon as the input temperature (In) exceeds the set target temperature (Set).
The desired setpoint temperature is set.
Setting the power level
1. Deactivate the key lock, if it is active, by pressing and holding the button mode/key lock
seconds.
26
The display key lock
expires.
26
The key lock
activates automatically after 60 seconds of inactivity.
10
2. Press (repeated) the button power level
the display.
Each time you press the button, the silent-mode
on the display change.
The desired power level is set.
Manual defrosting
At low ambient temperatures, the temperature at the heat exchanger can drop so low in heating mode that
the condensation water freezes and the heat exchanger ices up. The appliance monitors the temperature and
defrosts automatically if necessary, but also offers the option of initiating the defrosting process manually.
Activate defrost mode
1. Activate the heating operating mode.
22
The display heating-mode
lights up.
2. Press and hold the button mode/key lock
19
The displays defrost-mode
and heating-mode
3. Wait a few minutes until the defrosting process is complete.
19
The display defrost-mode
no longer blinks.
The heat exchanger is defrosted. Manual defrosting is complete.
Change temperature scale [°C/°F]
The heat pump has the option of displaying all measured and set temperatures in °C or °F. Simultaneously
10
press and hold the buttons power level
and mode/key lock
the temperature scales. The corresponding symbol on the display temperature
Key lock
The key lock is activated automatically after 60 seconds of inactivity. When the key lock is active, the display
26
key lock
lights up. When the key lock is deactivated, the display key lock
14
holding the button mode/key lock
for about 3 seconds the key lock is activated or deactivated in each case.
44
049317_049319_V2406
13
, until the desired setpoint temperature is set.
, until the symbol for the desired power level lights up on
16
17
, smart-mode
and power-mode
14
11
and down
at the same time for about 5 seconds.
22
blink.
14
for about 3 seconds, to switch between
15
lights up.
26
goes out . By pressing and
en
Set the time
14
for 3
The heat pump has a real-time clock to operate the heat pump in a time-controlled manner using a timer.
The clock continues to run for several days even without a power supply.
Set clock
1. Deactivate the key lock, if it is active, by pressing and holding the button mode/key lock
seconds.
The display key lock
The key lock
14
for 3
2. Press and hold the button down
The display time/timer
3. Press the button power level
The two seven-segment displays for hours of display time/timer
4. Drücken Sie (wiederholt) die Tasten Ab
5. Drücken Sie die Taste Leistungsstufe
18
indicators
Die beiden Siebensegmentanzeigen für Minuten der Anzeige Uhrzeit/Timer
6. Press (repeated) the button down
7. Press the button power level
The clock is set.
26
expires.
26
activates automatically after 60 seconds of inactivity.
11
for 3 seconds.
24
blinks. The time can be set.
10
.
11
13
und Auf
, um die Stunden der Uhrzeit einzustellen.
10
, um die Eingabe zu bestätigen.
11
13
or button up
, to set the minutes of the time.
10
, to confirm the entry.
049317_049319_V2406
en
14
for 3
24
blinks.
24
blinken.
45
Werbung
