Basic Operations - Panasonic CZ-RTC5 Kurzanleitung

Basic Operations

1
Start operation.
Press .
(The operation indicator illuminates.)
2
Select the item to set.
Press ◄ ►.
3
Change the setting.
Press ▲▼ →
(The cursor disappears.)
Note
Operation modes that cannot be set are not displayed.
The fl ap display differs from the actual fl ap angle.
Pressing after recovery from mains power failure will resume operation with
the contents before mains power failure has occurred.
If no operation is performed for a certain period of time, the backlight turns off to
save electricity. (Press any button for illumination.)
The energy saving operation restricts the maximum current value, resulting in
decreased cooling/heating performance.
(If the current of outdoor units does not reach the peak due to low load operation,
the current value is not restricted.)
The temperature range that can be set varies depending on the model.
The set temperature range can be changed using the remote controller.
Some models do not display the fl ap.
.
7
(EN)