Panasonic CZ-64ESMC3 Handbuch Seite 5

Screen display
Screen display
 Basic operation screen
Operation/Setting
target
Operation
mode
Operation is in process
Setting information icon example (Displayed on the basic operation screen and
standby screen)
According to the setting status, the number of icons and the display positions vary.
 Icon
1 2
1 The indoor unit fi lter needs to be cleaned.
2 The engine oil needs to be replaced. (Only when using a gas heat pump air conditioner.)
3 Switching operation modes is prohibited. (Switching to Auto mode is also prohibited.)
4 Remote control operation is restricted by a central control device. (Only in the remote control
mode)
5 The key operation is locked.
6 The weekly timer or Holiday is set.
7 The weekly timer is set. (The Holiday is not set.)
8 Energy saving operation is in process.
9 Fresh air is used for ventilation. (Only when connecting a commercially sold fan.)
10 The energy saving setting function is set.
11 The energy saving setting function is operating.
12 The operation capacity of the outdoor unit is restricted.
*1: May not be displayed if there are too many icon indications that overflow from the display
area.
Screen switching
Switching [Oper] (Operation),
[
[Vent/Misc] (Ventilation/Other)
* *
1 1
3 4 5 6
] (Prohibit R/C) and
Set temperature
7 8 9
Setting
information
icon
Fan speed
Flap
Operation guide
10 11 12
5