Panasonic CZ-64ESMC3 Handbuch Seite 10

Setting Operation Mode,
Temperature, Fan Speed and
Airflow Direction
Make each setting for the selected indoor unit.
1
Display the operation screen.
Press
2
Select the item to set.
Press ◄ ►.
• When the cursor is not visible, press
3
Set the selected item.
Press ▲▼ →
Note
 Operation modes that cannot be set are not displayed.
 The airflow direction display differs from the actual flap angle.
 If no operation is performed for a certain period of time, the back light turns off to
save electricity. (Press any button for illumination.)
 The temperature range that can be set varies depending on the model.
 The temperature range can be changed using this unit.
 Some models do not display the airflow direction.
 For [All] or [Zone], one typical indoor unit setting is displayed as an example. Not
all of the indoor units have the same setting as displayed.
10
.
.
(The cursor disappears.)
The unit returns to the
standby screen.
.