Panasonic ES-LT2N Bedienungsanleitung Seite 20

Problem
Makes a loud sound.
The shaving sensor
does not respond.
20
ES-LT6N_4N_2N_EU.indb 20
Action
Apply oil.
The shaver makes a high‑
pitched sound due to the linear
motor drive. This does not
indicate a problem.
Confirm that the blades are
properly attached.
Clean the system outer foil with
the brush.
Depending on the beard
thickness or the amount of
beard trimmings in the shaver
head, the shaving sensor may
not react and the driving sound
may not change. This is not
abnormal.
The shaving sensor may not
respond depending on the type
of the shaving gel and shaving
foam, but this is normal.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Apply oil. The shaving sensor
may not respond when there is
not enough oil on the blades.
Problem
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 17.)
The shaving sensor
responds even though
Replace the system outer foil
the shaver is not in
and/or inner blades.
contact with the skin.
Expected life of system outer
foil and inner blades:
System outer foil:
Inner blades:
FAQ
Question
The battery will deteriorate if
Will the battery
not used for over 6 months, so
deteriorate if not used
make sure to perform a full
for an extended period
charge at least once every 6
of time?
months.
The battery used is a lithium‑
Can I charge the shaver ion, so charging after every use
after every use? will have no effect on battery
life.
What is the constituent Constituent of the oil is liquid
of the dedicated oil? paraffin.
Action
Approximately 1 year
Approximately 2 years
Answer
2015/04/17 12:47:14