Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1
T
EMPERATURE CONTROLLER
2
G
LASS SHELVES
3 & 4
C
RISPER INCL
7
B
OTTOM DOOR TRAY
5
FREEZER DRAWER
6
A
DJUSTABLE FEET
4.2 Before initial operation
WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE! Leave the appliance in an upright position for at least 4 - 6
hours before you connect it to the mains to ensure, that the oil has
flowed back into the compressor.
NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.3
SETTING OF THE TEMPERATURE
or frozen food in the appliance. If you place food in the appliance before
it has reached its normal operating temperature, this foods can thaw and
/ or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
).
MAINTENANCE
3. Do not start the appliance immediately after installation. Wait at least 4 - 6
hours to ensure proper operation.
4. The settings of the temperature of the fridge can be adjusted manually. To do
this, turn the temperature controller for the temperature setting to the desired
preference. (s. chapter 4.3 S
5. If operation was interrupted, wait 5 minutes before restart.
F
:
RIDGE
/
INTERNAL LIGHT
.
-
BREAK
PROOF GLASS COVER
F
:
REEZER
( Q
1-3 )
UANTITY
ETTING OF THE TEMPERATURE
56
) before you place any fresh
CLEANING AND
).
Werbung
